System · EN 877 · DN 50–400
— For aggressive media and underground installation
Smart KML is designed for applications involving aggressive wastewater and for installation in the ground.
The external surface is provided with a zinc coating of 130 g/m² and a compatible top coat, offering reliable protection against soil corrosion. The internal surface is protected by a two-layer epoxy coating.
Typical applications include commercial kitchens, laboratories, hospitals, industrial facilities and buried drainage sections.

Construction
Key coating features
Zinc under the external epoxy protects the iron against soil corrosion; the internal coating handles aggressive wastewater.
Layers, outside to inside
- External top coatTwo-layer epoxy, 60 µm
- Zinc spray coating130 g/m² — protection against soil and environmental corrosion
- Grey cast ironPipes and fittings to EN 877
- Internal coatingTwo-layer epoxy, 240 µm, for aggressive wastewater, 1 < pH < 13
Fittings: zinc spray plus two-layer epoxy powder coating.
Three facts
Visible on the product
Marking
EN 877 and nominal size on every item
Pipes carry a printed system name, DN and standard. Fittings carry the brand mark, the standard, DN and angle cast in.
Couplings
Stainless steel couplings
Rapid Inox or Smart Grip E Inox stainless steel couplings (W4/W5) for outdoor and buried installation without additional corrosion protection.
Coating
Chemical resistance
External: zinc spray 130 g/m² plus two-layer epoxy. Internal: two-layer epoxy rated for wastewater in the range 1 < pH < 13.
Couplings
Stainless steel couplings
Smart KML pipes and fittings are joined with W4/W5 grade stainless steel couplings.

Product range
Items and sizes
Select a diameter to see which items are available in that size. Full dimensions are in the catalogue.
| DN | Length, mm | Standard | |
|---|---|---|---|
| Pipe | 50, 70, 80, 100, 125, 150, 200, 250, 300, 400 | 3000 | EN 877 |
| Bend 15° | 50, 70, 80, 100, 125, 150, 200 | – | EN 877 |
| Bend 30° | 50, 70, 80, 100, 125, 150, 200, 250, 300 | – | EN 877 |
| Bend 45° | 50, 70, 80, 100, 125, 150, 200, 250, 300, 400 | – | EN 877 |
| Bend 69° | 50, 70, 80, 100, 125, 150, 200 | – | EN 877 |
| Bend 88° | 50, 70, 80, 100, 125, 150, 200 | – | EN 877 |
| Bend 88° with access door | 100, 150 | – | EN 877 |
| Bend 45° with access door | 100, 150 | – | EN 877 |
| Bend 45° with extended (250 mm) leg | 70, 80, 100 | – | EN 877 |
| Bend 88° with extended (250 mm) leg | 70, 80, 100 | – | EN 877 |
| Bend 88° with 250 mm calming section | 100, 125, 150 | – | EN 877 |
| Bend 88° made of two 44° bends | 50, 70, 80, 100, 125, 150 | – | EN 877 |
| Long-radius bend 88° with access door | 100, 150 | – | EN 877 |
| Branch 45° | 50, 70, 80, 100, 125, 150, 200, 250, 300, 400 | – | EN 877 |
| Branch 88° | 50, 70, 80, 100, 125, 150, 200 | – | EN 877 |
| Branch 88° with access door and swept inlet | 100, 150 | – | EN 877 |
| Branch 45° with access door | 100, 150, 200 | – | EN 877 |
| Branch 88° with long leg | 100, 150 | – | EN 877 |
| Double branch (cross) 45° | 100, 150 | – | EN 877 |
| Double branch (cross) 70° | 100, 125 | – | EN 877 |
| Double branch (cross) 88° | 100, 125, 150 | – | EN 877 |
| Corner double branch 88° (two-plane) | 80, 100, 150 | – | EN 877 |
| Corner double branch with long leg | 100, 150 | – | EN 877 |
| Double branch 88° with long leg | 100, 150 | – | EN 877 |
| Eccentric reducer | 70, 80, 100, 125, 150, 200, 250, 300, 400 | – | EN 877 |
| Access pipe with round opening | 50, 70, 80, 100 | – | EN 877 |
| Access pipe with rectangular door | 100, 125, 150, 200, 250, 300 | – | EN 877 |
| Stack support pipe (without support ring) | 50, 70, 80, 100, 125, 150, 200, 250, 300 | – | EN 877 |
| Support ring with rubber seal | 50, 70, 80, 100, 125, 150, 200, 250, 300 | – | EN 877 |
| End cap | 50, 70, 80, 100, 125, 150, 200, 250, 300, 400 | – | EN 877 |
| Press plug | 50, 70, 80, 100, 125, 150, 200, 250, 300 | – | EN 877 |
| Plug with clamping brackets | 100, 125, 150, 200 | – | EN 877 |
| Trap (siphon) | 50, 70, 80, 100, 125, 150, 200 | – | EN 877 |
| Flange adapter | 100, 125, 150, 200 | – | EN 877 |
Source: Smart catalogue. Check items and sizes against the current catalogue and the project specification.
Pipes
Pipe dimensions
Smart KML pipe to EN 877.
| 50 | 58 | 3.5 | 5.3 |
| 70 | 78 | 3.5 | 6.2 |
| 80 | 83 | 3.5 | 6.7 |
| 100 | 110 | 3.5 | 9.5 |
| 125 | 135 | 4.0 | 12.6 |
| 150 | 160 | 4.0 | 16.3 |
| 200 | 210 | 5.0 | 23.8 |
| 250 | 274 | 5.5 | 32.1 |
| 300 | 326 | 6.0 | 45.1 |
| 400 | 429 | 6.3 | 64.1 |
Pipe length 3000 mm. Weights are for reference only, as given in the catalogue.
Products
Pipe and fittings
Pipe
Branch 45°
Bend 45°
Typical applications
- Commercial kitchens and food processing facilities
- Laboratories and medical facilities
- Industrial wastewater with higher chemical load
- Buried drainage pipelines
- Areas with aggressive soil conditions
Catalogue
Download the full catalogue
Detailed product information, dimensions, fittings and technical data — all in one document.
PDF · 28.1 MB · RU · Oct 2026